How To Measure For Cubicle Curtain Tracks
- 1. Measure along the floor and treat rounded corners as square corners for measuring purposes (bends are softer but measure as if hard corners). Draw track shape and label each side of the track with measurement in feet. Give the entire length of each side of track right up to the square bend (for example, 7’ X 9’ with a 90 degree bend).
- 2. For any bends determine if they are 90 degrees or 45 degrees. These are the two kinds available.
- 3. For adjacent tracks in multibed areas, be sure to add 9” for overlap (see image below). This allows the tracks to create privacy where they meet.
- 4. Sketching the track is a good way to record measurement and can be useful later on for installation. Remember to note the room numbers also.
Note: To order tracks that include a bend you will need to subtract from each track side length the amount taken up by the bend. In the case where you used a 2’ X 2’ bend, you would subtract 2’ from each side it attaches to. These items are the straight pieces that attach to the bend.
Example: If you are covering two 8’ walls that are connected by a bend you would order the 2’X2’ bend and two 6’ straight tracks.